walton ac 2 ton price in bangladesh

 

 walton ac 2 ton price in bangladesh: An In-Depth Analysis

Introduction
Walton, a leading Bangladeshi brand, has established a strong presence in the electronics and home appliances market. Known for offering a wide range of products that combine affordability with quality, Walton has become a household name in Bangladesh. Among their extensive lineup of home appliances, air conditioners (ACs) are one of the most popular products. This article will provide a detailed overview of Walton’s 2-ton air conditioners, focusing on their prices, features, performance, and overall value in the Bangladeshi market.

walton ac 2 ton price in bangladesh

Walton 2-Ton Air Conditioners: A Guide to the Top 10 Models and Their Prices”

Here’s a list of the top ten Walton 2-ton air conditioner models along with their approximate prices in Bangladesh:
1. Walton WSI-T24000B (Inverter)

  • Price: BDT 75,000 – BDT 85,000
  • Key Features: Inverter technology, turbo cooling, energy-efficient, quiet operation.

2. Walton WSI-T24000R (Inverter)

  • Price: BDT 70,000 – BDT 80,000
  • Key Features: Inverter technology, fast cooling, durable build, energy-saving mode.

3. Walton WSN-T24000F (Non-Inverter)

  • Price: BDT 60,000 – BDT 70,000
  • Key Features: Affordable option, reliable cooling, simple operation.

4. Walton WSI-T24000H (Inverter)

  • Price: BDT 85,000 – BDT 95,000
  • Key Features: Smart controls, eco-friendly refrigerant, premium design, high energy efficiency.

5. Walton WSN-T24000G (Non-Inverter)

  • Price: BDT 62,000 – BDT 72,000
  • Key Features: Robust performance, easy maintenance, turbo cooling.

6. Walton WSI-T24000C (Inverter)

  • Price: BDT 77,000 – BDT 87,000
  • Key Features: Energy-efficient, fast cooling, low noise operation, elegant design.

7. Walton WSI-T24000X (Inverter)

  • Price: BDT 80,000 – BDT 90,000
  • Key Features: Advanced inverter technology, intelligent temperature control, durable construction.

8. Walton WSN-T24000Z (Non-Inverter)

  • Price: BDT 65,000 – BDT 75,000
  • Key Features: High cooling capacity, energy-efficient, easy to operate, turbo mode.

9. Walton WSI-T24000M (Inverter)

  • Price: BDT 78,000 – BDT 88,000
  • Key Features: Inverter compressor, eco-friendly refrigerant, smart features, stylish design.

10. Walton WSN-T24000K (Non-Inverter)

  • Price: BDT 63,000 – BDT 73,000
  • Key Features: Economical option, efficient cooling, durable and reliable, simple interface.

walton ac 2 ton price in bangladesh

Price Range of Walton 2-Ton ACs in Bangladesh

As of 2024, the price of Walton 2-ton air conditioners in Bangladesh typically ranges from BDT 60,000 to BDT 95,000. The variation in price depends on the model, features, and where the AC is purchased. Here’s a breakdown of some popular models and their approximate prices:

Walton WSI-T24000B:

This is one of the most popular models in the 2-ton category. It comes equipped with inverter technology and offers efficient cooling with reduced power consumption. The price for this model ranges between BDT 75,000 and BDT 85,000.

Walton WSI-T24000R:

Another popular 2-ton AC from Walton, this model is known for its robust build and effective cooling performance. It is priced around BDT 70,000 to BDT 80,000. walton ac 2 ton price in bangladesh

Walton WSN-T24000F:

This model is a non-inverter AC but is still favored by many due to its affordability and reliable performance. The price for this unit ranges from BDT 60,000 to BDT 70,000. 

Walton WSI-T24000H:

This is a premium model with advanced features such as smart controls, eco-friendly refrigerant, and enhanced cooling capabilities. The price for this AC can go up to BDT 95,000. walton ac 2 ton price in bangladesh

Overview of Walton Air Conditioners

Walton’s air conditioners are known for their durability, energy efficiency, and modern technology. The brand offers a variety of AC models, ranging from 1-ton to 2-ton units, designed to cater to different room sizes and cooling needs. The 2-ton AC is particularly popular among consumers with larger spaces, such as living rooms, offices, and commercial spaces. walton ac 2 ton price in bangladesh
Walton’s 2-ton air conditioners come with advanced features such as inverter technology, eco-friendly refrigerants, and smart controls, making them an excellent choice for those looking for efficient and reliable cooling solutions.
walton ac 2 ton price in bangladesh
Factors Influencing Walton 2-Ton AC Prices in Bangladesh

Technology and Features: The incorporation of advanced technology such as inverter compressors, eco-friendly refrigerants, and smart connectivity options can significantly influence the price of Walton 2-ton ACs.

Energy Efficiency: Energy-efficient models, which can save electricity and reduce utility bills, tend to be priced higher. Walton’s inverter ACs are a good example, as they consume less power compared to non-inverter models. walton ac 2 ton price in bangladesh

Cooling Capacity: The cooling capacity of an AC is directly proportional to its price. A 2-ton AC, designed to cool larger spaces, is naturally more expensive than a 1-ton or 1.5-ton unit.walton ac 2 ton price in bangladesh

 Design and Build Quality: Walton ACs come in various designs, including sleek and modern units that can complement the aesthetics of any room. High-quality materials and superior build quality can drive up the price.

Brand Reputation and Warranty: Walton is a well-established brand with a good reputation in the market. The brand’s after-sales service, warranty coverage, and customer support add value to the product, often reflected in the price. walton ac 2 ton price in bangladesh

Market Demand and Availability: Prices can fluctuate based on market demand and availability. During peak summer seasons, for example, the prices of ACs may rise due to increased demand.

walton ac 2 ton price in bangladesh

Features and Benefits of Walton 2-Ton ACs

Inverter Technology: Many Walton 2-ton ACs come with inverter technology, which allows the compressor to run at variable speeds. This ensures that the AC consumes only the amount of power necessary to maintain the desired temperature, leading to significant energy savings. walton ac 2 ton price in bangladesh

Eco-Friendly Refrigerants: Walton ACs use eco-friendly refrigerants like R410A and R32, which have a lower impact on the environment compared to older refrigerants like R22. This makes Walton ACs a more sustainable choice. walton ac 2 ton price in bangladesh

Smart Controls: Some of the higher-end models come with smart controls, allowing users to operate the AC remotely via a smartphone app. This feature adds convenience, especially for tech-savvy consumers.

Turbo Cooling: Walton 2-ton ACs are equipped with turbo cooling features, which allow the AC to cool the room faster. This is particularly useful in hot climates where quick cooling is essential. walton ac 2 ton price in bangladesh

Durability and Reliability: Walton is known for manufacturing durable and reliable products. The 2-ton ACs are built to withstand harsh weather conditions, ensuring long-lasting performance. walton ac 2 ton price in bangladesh

Energy Efficiency: Walton’s inverter ACs are designed to be energy-efficient, helping consumers save on electricity bills. The brand also offers models with high Energy Efficiency Ratios (EER), ensuring optimal performance with minimal power consumption.

Performance of Walton 2-Ton ACs in Bangladeshi Climate
Bangladesh experiences a tropical climate with hot and humid summers, making air conditioning a necessity rather than a luxury. Walton 2-ton ACs are designed to perform well in such conditions, providing efficient cooling even during the hottest months.
The turbo cooling feature, combined with the powerful compressor, ensures that the AC can cool large rooms quickly and effectively. The use of eco-friendly refrigerants also ensures that the AC remains efficient even in extreme temperatures. walton ac 2 ton price in bangladeshMoreover, Walton ACs are equipped with features like dehumidification, which helps reduce humidity levels in the room, making the indoor environment more comfortable.
walton ac 2 ton price in bangladesh

Installation and Maintenance

Installation Process step by step 
Installing a 2-ton Walton air conditioner requires careful planning and attention to detail. Below is a step-by-step guide to help you through the installation process:

Step 1: Choose the Installation Location

  • Indoor Unit: Select a location on a wall that can support the weight of the indoor unit. Ensure the area is free from direct sunlight, heat sources, and obstructions. Maintain at least 6-7 feet of height from the floor for optimal air circulation. walton ac 2 ton price in bangladesh
  • Outdoor Unit: Choose a well-ventilated, flat surface away from direct sunlight, rain, and dust. The outdoor unit should be placed on a sturdy surface like a concrete slab to minimize vibrations.

Step 2: Gather Necessary Tools and Materials

  • Tools: Drill, screwdriver, level, pipe cutter, spanner, measuring tape, and vacuum pump.
  • Materials: Mounting brackets, screws, wall sleeves, insulation tape, copper pipes, electrical wires, and drain hose.

Step 3: Mount the Indoor Unit

  1. Install the Mounting Plate:
    • Use a level to ensure the mounting plate is perfectly horizontal.
    • Mark the holes for drilling using the mounting plate as a guide.
    • Drill holes into the wall and insert wall plugs to secure the plate.
    • Attach the mounting plate to the wall using screws.
    • walton ac 2 ton price in bangladesh
  2. Drill a Hole for the Piping:
    • Drill a 3-4 inch hole through the wall for the refrigerant piping, drainage pipe, and electrical wiring.
    • Ensure the hole slopes slightly downward on the outside to facilitate drainage.
  3. Prepare the Indoor Unit:
    • Connect the refrigerant piping and electrical wires to the indoor unit.
    • Wrap the pipes and wiring together with insulation tape to prevent heat loss.
    • Pass the piping and wiring through the hole in the wall.
    • Hang the indoor unit onto the mounting plate, ensuring it locks securely into place.

Step 4: Install the Outdoor Unit

  1. Position the Outdoor Unit:
    • Place the outdoor unit on a solid surface like a concrete slab or metal frame.
    • Ensure the unit is level and has adequate space around it for airflow (at least 12 inches on all sides).
  2. Connect the Refrigerant Piping:
    • Connect the refrigerant piping from the indoor unit to the outdoor unit.
    • Tighten the flare nuts securely to prevent leaks.
  3. Connect the Electrical Wiring:
    • Match the wire connections from the indoor unit to the outdoor unit according to the color codes (refer to the user manual).
    • Secure the wiring connections with wire nuts or connectors.
  4. Attach the Drain Hose:
    • Connect the drain hose to the designated outlet on the outdoor unit.
    • Ensure the drain hose is angled downward to allow water to flow freely away from the unit.

Step 5: Vacuum the Refrigerant Lines

  • Remove Moisture and Air:
    • Attach a vacuum pump to the refrigerant lines to remove any air or moisture.
    • Run the vacuum pump for about 15-30 minutes to ensure all air is removed.
    • Close the service valves on the outdoor unit after vacuuming.

Step 6: Final Connections and Testing

  1. Insulate the Connections:
    • Wrap all exposed piping connections with insulation tape to prevent condensation and energy loss.
    • Secure the insulation with cable ties or tape
  1. Test the System:
    • Turn on the power to the air conditioner and use the remote control to set the desired temperature.
    • Observe the operation of both the indoor and outdoor units.
    • Check for any unusual noises, vibrations, or leaks.
  2. Seal the Wall Hole:
    • Use caulk or foam to seal the hole where the pipes and wiring pass through the wall.
    • This prevents air leaks and keeps pests from entering the home.

Step 7: Perform a Final Inspection

  • Check All Connections: Ensure all piping, wiring, and connections are secure and properly insulated.
  • Monitor Performance: Run the air conditioner for a while to ensure it is cooling efficiently and there are no issues.

Step 8: Provide Instructions

  • User Guidance: Explain the operation of the air conditioner to the user, including how to use the remote control, set the timer, and perform regular maintenance. walton ac 2 ton price in bangladesh

walton ac 2 ton price in bangladesh

Maintenance process step by step 

Regular maintenance of a Walton 2-ton air conditioner is essential to ensure its optimal performance, energy efficiency, and longevity. Here’s a step-by-step guide to help you maintain your AC unit effectively:

1. Turn Off the Power

Before starting any maintenance work, ensure that the air conditioner is completely turned off. This is crucial for your safety and to prevent any electrical mishaps. walton ac 2 ton price in bangladesh

2. Clean or Replace the Air Filters

  • Frequency: Every 1 to 2 months.
  • Process:
    1. Access the Filters: Open the front panel of the indoor unit to access the air filters.
    2. Remove the Filters: Gently slide out the filters.
    3. Clean the Filters: Wash the filters with lukewarm water and mild soap. Rinse thoroughly and let them air dry completely before reinstalling. walton ac 2 ton price in bangladesh
    4. Replace if Necessary: If the filters are damaged or heavily soiled, consider replacing them.

Importance: Clean filters improve airflow, enhance cooling efficiency, and reduce the strain on the AC system.

3. Inspect and Clean the Coils

  • Frequency: Annually.
  • Process:
    1. Indoor Evaporator Coils:
      • Gently clean the evaporator coils using a soft brush or a vacuum with a brush attachment to remove dust and debris.
      • If necessary, use a coil cleaner to remove stubborn dirt and grime. walton ac 2 ton price in bangladesh
    2. Outdoor Condenser Coils:
      • Clear away any debris, leaves, or dirt from the outdoor unit.
      • Use a garden hose to gently wash the condenser coils. Avoid using high pressure to prevent damaging the fins.

Importance: Clean coils ensure efficient heat exchange, leading to better cooling performance and energy efficiency.

4. Check the Refrigerant Levels

  • Frequency: Annually or if cooling efficiency decreases.
  • Process:
    1. Inspect for Leaks: Look for any signs of refrigerant leaks around the outdoor unit.
    2. Measure Refrigerant Levels: Use a refrigerant gauge to check the levels.
    3. Recharge if Needed: If the levels are low, recharge the refrigerant according to the manufacturer’s specifications. It is advisable to call a professional for this task. walton ac 2 ton price in bangladesh

Importance: Proper refrigerant levels are crucial for efficient cooling and to prevent the compressor from overheating.

5. Clean the Condensate Drain Line

  • Frequency: Every 3 to 6 months.
  • Process:
    1. Locate the Drain Line: Find the condensate drain line near the indoor unit.
    2. Flush the Line: Use a mixture of water and vinegar or a commercial cleaner to flush out the drain line. This will help remove any mold, algae, or debris buildup. walton ac 2 ton price in bangladesh
    3. Check for Clogs: Ensure that the drain line is clear and water can flow freely.

Importance: A clean drain line prevents water from backing up into the unit and causing leaks or water damage.

6. Inspect and Clean the Fan Blades

  • Frequency: Annually.
  • Process:
    1. Indoor Fan:
      • Open the front panel of the indoor unit to access the fan.
      • Wipe the fan blades with a damp cloth to remove dust and dirt.
    2. Outdoor Fan:
      • Remove the top cover of the outdoor unit to access the fan.
      • Clean the blades with a cloth or a brush, being careful not to bend them.

Importance: Clean fan blades ensure proper airflow, reduce noise, and improve the efficiency of the AC.

7. Tighten Electrical Connections

  • Frequency: Annually.
  • Process:
    1. Inspect Connections: Check all electrical connections, including those in the indoor and outdoor units.
    2. Tighten Loose Connections: Use a screwdriver to tighten any loose connections.

Importance: Proper electrical connections ensure safe operation and prevent potential electrical failures.

8. Lubricate Moving Parts

  • Frequency: Annually or as needed.
  • Process:
    1. Locate Moving Parts: Identify any moving parts such as the fan motor.
    2. Apply Lubricant: Use a few drops of motor oil or a suitable lubricant to keep the parts moving smoothly.

Importance: Lubrication reduces friction, prevents wear and tear, and extends the life of the moving components.

9. Check the Thermostat

  • Frequency: Annually.
  • Process:
    1. Test Accuracy: Ensure that the thermostat is reading the room temperature accurately.
    2. Recalibrate if Necessary: If the thermostat is off, recalibrate it according to the manufacturer’s instructions.
    3. Upgrade to a Smart Thermostat: Consider upgrading to a smart thermostat for more precise control and energy savings.

Importance: A properly functioning thermostat ensures the AC operates efficiently and maintains the desired temperature.

10. Inspect the Insulation on Refrigerant Lines

  • Frequency: Annually.
  • Process:
    1. Inspect the Insulation: Check the insulation on the refrigerant lines between the indoor and outdoor units.
    2. Replace Damaged Insulation: If the insulation is worn or damaged, replace it to prevent energy loss.

Importance: Proper insulation helps maintain the efficiency of the refrigerant system and reduces energy consumption.

11. Schedule Professional Maintenance

  • Frequency: Annually or bi-annually.
  • Process:
    1. Hire a Professional: Schedule a professional maintenance service to conduct a thorough inspection and service of the AC.
    2. Complete a Full Checkup: The technician will perform tasks such as checking refrigerant levels, testing system performance, and ensuring all components are in good working order. walton ac 2 ton price in bangladesh

Importance: Professional maintenance ensures that any hidden issues are identified and addressed before they become major problems.

Warranty and After-Sales Service

Walton offers a comprehensive warranty on its 2-ton ACs, typically covering 1-2 years on the complete unit and up to 5 years on the compressor.

 

The brand’s after-sales service is well-regarded, with a network of service centers across Bangladesh.

Customers can also access Walton’s customer support through their helpline or online portal, making it easy to get assistance with any issues or queries. walton ac 2 ton price in bangladesh
walton ac 2 ton price in bangladesh
Comparison with Competitors
When compared to other brands available in Bangladesh, Walton’s 2-ton ACs offer excellent value for money.

While there are other international brands like LG, Samsung, and Gree, Walton stands out due to its competitive pricing, robust build quality, and features tailored to the Bangladeshi market.

walton ac 2 ton price in bangladesh
International brands might offer more advanced features or better energy ratings, but they come at a higher price point.

 

Walton, being a local brand, offers a balance between cost and quality, making it an attractive option for budget-conscious consumers.

Customer Reviews and Feedback
Customer reviews for Walton 2-ton ACs are generally positive, with many users praising the product’s cooling efficiency, durability, and value for money.

 

The inverter models, in particular, have received favorable reviews for their energy-saving capabilities.
Some customers have highlighted the need for improved after-sales service in certain regions, but overall, Walton’s customer support is considered reliable. walton ac 2 ton price in bangladesh.

 

 

 

Conclusion
Walton’s 2-ton air conditioners are a solid choice for consumers in Bangladesh looking for an efficient, reliable, and affordable cooling solution.

With a range of models available, Walton caters to different needs and budgets, making it a versatile option for both residential and commercial spaces. walton ac 2 ton price in bangladesh.

The prices of Walton 2-ton ACs are competitive, especially when considering the advanced features and energy efficiency they offer. While there are other brands in the market, Walton’s strong reputation, local manufacturing, and understanding of the Bangladeshi climate make it a preferred choice for many consumers. walton ac 2 ton price in bangladesh
Whether you are looking to cool a large living room, office, or commercial space, Walton’s 2-ton air conditioners provide the performance and reliability you need to stay comfortable in Bangladesh’s hot and humid weather. walton ac 2 ton price in bangladesh

 

Leave a Reply

Your email address will not be published. Required fields are marked *